Split core CTs for bus bar

Current transformers with standard secondary rated current of 5 A. Split-core CTs can be simply opened and installed around the wire/line even in systems under operation. This CT is supported by our instruments with X/5A options.

 

Protection level is bipolar 6.5 Vp (protection against overvoltage). Installation category is 600 V CAT III, 300 V CAT IV. Output connection is adjusted to lead wire, 18 AWG (0.82 mm²), 600 V AC.

 

Current transformers with standard secondary rated current of 5 A. Split-core CTs can be simply opened and installed around the wire/line even in systems under operation. This CT is supported by our instruments with X/5A options.

 

Protection level is bipolar 6.5 Vp (protection against overvoltage). Installation category is 600 V CAT III, 300 V CAT IV. Output connection is adjusted to lead wire, 18 AWG (0.82 mm²), 600 V AC.

 

Models JSC-01- xxx/5A, JSC-02- xxx/5A, JSC-03- xxx/5A are specified by the hole diameter 32x38 mm, 62x73 mm, 62x141 mm.

 

 

Highest voltage for equipment: 0.72 kV
Power frequency test voltage: 3 kV
Nominal primary current: 100 - 2400 A
Rated continuous thermal current, Icth: 120 % In
Accuracy class - measurement: 0.5, 1, 3
Nominal power: 0.5 - 20 VA
Nominal frequency: 50 / 60 Hz
Weight:  kg
Thermal insulation class: E
Operation conditions: 

Operating temperature range -20°C to +60°C

Relative humidity 0-90%, non-condensing

 

Standard: IEC 61869-1, IEC 61869-2, IEC 61010-1