VSNC - wire free detector of presence of high voltage

Detector of presence of high voltage is constructed for simple assembly, operation in the indoor and outdoor environment at the zero maintenance.The device is set for the optical signalization of presence of high voltage on conductors.The voltage is indicated on a display by signs L1, L2, L3, U. The detector is delivered with the signs according to customer´s specification. The device has the sign tightly set by manufacturing process and cannot be changed.

Detector of presence of high voltage is constructed for simple assembly, operation in the indoor and outdoor environment at the zero maintenance.The device is set for the optical signalization of presence of high voltage on conductors.The voltage is indicated on a display by signs L1, L2, L3, U. The detector is delivered with the signs according to customer´s specification. The device has the sign tightly set by manufacturing process and cannot be changed.

The detector is tightened on each conductor oriented in the longitudinal direction of the device. Assembly can be carried out on the round and rectangular conductor. The conductor under voltage is desirable to be as close to the back of the side of device as possible. By taking away from the conductor under voltage, the detector sensitivity falls and the lower voltage boundary, from which the display indicates, rises. The detector does not work on the shielded conductor.

Assembly instructions:

Dimension is: 65x54x42 mm. Wire free voltage indicator is always tightened upright to the electric conductor with the help of two electrician strapping tapes. Strapping tapes are pulled through the upper and lower assembly hole in the upright state and fastened to the given electric conductor

Detector meets the requirements of the standard ČSN EN 61243-5

Other technical parameters can be consulted with the manufacturer.

Order codes for VSNC
Order code Performance
600000499 VSNC-L1
600000500 VSNC-L2
600000501 VSNC-L3
600000502 VSNC-U
Highest voltage for equipment: 10 - 110 kV
Nominal frequency: 50 Hz
Weight: 0,23 kg
Thermal insulation class: E
Operation conditions: 

operating temperature from -5 to + 40 °C

 

Standard: ČSN EN 61243-5